Adaptec RAID 2100S Software User's Manual page 101

You must configure remote communication before it can be used.
For both workstations and servers, this is done by editing the
Storage Manager configuration file (dptmgr.ini). There may be
additional server configuration steps, depending on your operating
system. You must have physical connections between the servers
and client workstations.
Note: Under Windows 95/98/Me, the server must be started
manually by selecting the Adaptec Communication Server
icon. This version of the communication server runs in a
DOS window.
Editing the Configuration File
Both the workstation and server communication engines use the
Storage Manager configuration file (dptmgr.ini). This file is contained
in the directory in which you installed Storage Manager.
The OPTIONS section of the file controls the behavior of the
communication server. To control the display of messages from the
server, change the Verbose parameter, Verbose=x, where x is:
0 No messages
1 Default—Basic messages, such as errors, connects, and
disconnects
More messages, including Option 1 messages with socket
2
numbers and TCP/IP addresses
3 All messages, including Option 2 messages and message
tracing
The MODULES section of the file tells the communication server
which protocol setting you want to use for communication.
[MODULES]
TCP
Specify as many as needed
Communication server uses TCP protocol
Storage Manager
3-56