Information Windows; Host Bus Adapter Information Window; Information Windows 3-24 - Adaptec RAID 2100S Software User's Manual

Pending
Rebuilding

Information Windows

This section discusses information windows, which includes:
Host Bus Adapter Information Window on page 3-24
Battery Backup Configuration Window – Adaptec 3200S/3210S/
3400S/3410S Only on page 3-26
Configure Host Bus Adapter Window on page 3-27
Flash Configuration Window on page 3-29
Device Information Window on page 3-31
Device Configuration Window on page 3-33
Double-click a controller or device icon to display an Information
window for that controller or device.

Host Bus Adapter Information Window

This window (see
information reported by the selected controller.
The Controller section displays the Model, Serial #, Firmware
revision, and amount of installed cache. ECC is checked only if ECC
memory is installed.
The Attached Modules section shows the expansion modules and
type and capacity of memory modules installed.
The array has been created and the build is queued on
the controller, but is not yet started.
Data is being rebuilt onto a drive in the array.
Figure 3-12) displays HBA configuration
Storage Manager
3-24