Keyboard Reference; Menu Control - Adaptec RAID 2100S Software User's Manual

3
Create disk arrays (see
groups can be created or modified at any time after system
installation. However, if the boot device will be an array, that
array must be created before the operating system is installed.
4
Exit SMOR when you are finished with the configuration tasks.
Arrays that were created or modified start building at this
time. For large arrays, this process may take several hours. You
can perform other activities on the system while the build
operation continues.
The array groups are accessible during the build process, with data
protected; however RAID performance is at a reduced level until the
build is complete.
If you have exited SMOR and you want to monitor the progress of
the build operation, you can view the Array Group Information
window for the array in Storage Manger. See
page 3-12 for additional information.

Keyboard Reference

The navigation keys are as follows:

Menu Control

Alt + (Menu Highlight)
Enter
Up/Down Arrows
Esc
Array Operations on page
Select the corresponding menu or menu item.
Initiate an action.
Move between menu choices.
Return to the Tree View.
Storage Manager on ROM
2-26). Array
Array Groups on
2-3