The Host Bus Adapter Info window (ATA and SCSI) displays the
current bus configuration.
Figure 3-12. Host Bus Adapter Info Window – ATA and SCSI
Note: The RAID controller requires 16 MB of memory for its
operation. The available cache memory reported here equals
the amount of memory installed minus 16 MB.
The following buttons are available:
Configure
Event Log
I/O Stats
Print
OK
Examine and change HBA parameters, or download
new firmware code. For more information, see
page
3-27.
Examine records of transfers to and from attached
devices. For more information, see
Examine records of cache and command transfers. For
more information, see
Print this window.
Accept changes and return to previous window.
page
page
3-49.
Storage Manager
3-35.
3-25