Adaptec RAID 2100S Software User's Manual page 102

The following list shows all supported options. The value listed is
the default; optional values are in parentheses.
[TCP]
SOCKET=2091
Setting up the Server
If you are using an operating system that supports the Adaptec
communication server and selected the Communication Server
option during Storage Manager setup, the server was automatically
installed at that time. Additional steps may be required to complete
the installation, depending on your operating system. Most
operating systems require setting up a user name and/or password
before the server can be accessed. The default password is password.
Windows 2000 or Windows NT Server
The server is installed as the Adaptec Communication Service and
starts automatically when Windows starts. Access requires both a
user name and password, which are defined through the User
Manager. The user name must have Administrator level privileges.
To setup the user accounts for Windows 2000 and Windows NT 4,
follow these steps:
1
Login with Administrator privileges.
2
From the Start menu select
Programs > Administrative Tools > User Manager.
3
Select Policies > User Rights and check the Show Advanced
User Rights box when the User Rights Policy window appears.
4
Grant the Act as part of the operating system and Log on as
batch job rights to the Administrators group.
5
Restart the system before you attempt to use Remote
Communication.
TCP/IP protocol.
TCP socket on which to listen. Can be any valid
socket number.
Storage Manager
3-57