Adaptec RAID 2100S Software User's Manual page 84

Windows NT & Windows 2000
The broadcaster collects events from the controller and records them
to files in the c:\program files\adaptec\storage manager folder for
use by Storage Manager. Additionally, events are sent to the
Windows Event Viewer or e-mailed as specified in the Event
Broadcasting window.
Installing the Broadcaster
During installation, the broadcaster is copied to the c:\program
files\storage manager folder by default as a Windows service and
runs automatically whenever the system is started. This allows
events to be gathered and recorded without user intervention.
Stopping and Restarting the Broadcaster
The broadcaster is a Windows service; therefore, it must be managed
from one of the Windows service management applications.
The broadcaster can be controlled using the Services Control
Panel. To access a service, click Services in the Control Panel
folder.
Highlight Storage Manager Broadcaster in the Services list.
Then, click Start or Stop to start or stop the broadcaster
service.
The broadcaster can also be started or stopped from a
command line prompt by using the NET command as follows:
net start dptserv
net stop dptserv
Viewing Events
Events can be viewed either through the Event Log Display window
in Storage Manager (refer to
Event Viewer.
To run the Event Viewer, select Event Viewer from the
Administrative Tools group on the Start menu. The Event Viewer
enables you to view events that have been placed in the System,
Security, and Application logs. To view controller events, click Log >
Application.
Starts the broadcaster
Stops the broadcaster
Event Log on page
Storage Manager
3-35) or the Windows
3-39