Adaptec RAID 2100S Software User's Manual page 32

The Device Information tab displays general information and
configuration. This view is divided into either two or three parts:
Description , SCSI Capabilities (for SCSI based RAID controllers
only), and Status.
The Description section displays a general description of the
highlighted device, as follows:
Description
Revision
Address
Capacity
Removable
Read Only
Block Size
Negotiated
Transfer
Rate
Manufacturer name and model number as reported by
the device, followed by the icon for the device.
Device firmware revision.
Device address in the form HBA x, Channel x, ID x,
LUN x. Display contains as much information as
necessary to unambiguously define the address of the
device.
Device capacity in MB. For removable media, the
reported capacity is for the currently inserted media or
no media inserted if no media is inserted. Tape drives
do not report media.
As reported by the device.
Block size reported by device.
Bus speed negotiated between the device and the
controller.
Maximum transfer rate for negotiated bus speed and
transfer path (8-bit, 16-bit).
Storage Manager on ROM
2-21