Adaptec RAID 2100S Software User's Manual page 86

NetWare
The broadcaster collects controller events and records them to files
in the sys:\system\dpt directory for use by Storage Manager.
Additionally, events are broadcast to the system console, the system
error log file, or to users as specified in the Storage Manager Event
Broadcasting window.
If a you want to receive broadcast messages from the broadcaster
module (dptnwmsg.nlm) you must be logged in to the NetWare
server from a client workstation and your NetWare user name must
be in the dptelog.ini file as user=user_name. Multiple names can be
specified by separate entries.
Installing the Broadcaster
When you install the controller driver, you automatically install the
the broadcaster in sys:\system\adaptec on the server. During
broadcaster installation, you are prompted to specify if the
broadcaster is to be loaded automatically when the server is booted.
Doing so allows events to be gathered and recorded without user
intervention.
Stopping and Restarting the Broadcaster
The broadcaster is a NetWare Loadable Module (NLM) that can be
loaded or unloaded from the server's command prompt:
unload dptelog
load sys:\system\dpt\dptelog
Viewing Events
Events can be viewed on a network workstation through the Event
Log Display window in Storage Manager (see
page 3-35). Events can also be viewed by examining the System
Error Log file sys$log.err on the server if the broadcaster has been
configured to send events to that file.
Storage Manager
Unloads the broadcaster
Loads the broadcaster
Event Log on
3-41