Adaptec RAID 2100S Software User's Manual page 38

a
When you are ready to proceed, select Ok.
b
The Eligible Devices tab appears, as shown in
The list of eligible devices can be either individual hard
drives or previously created array groups. Array groups
appear in the list when you select RAID 0 and eligible array
groups exist.
File RAID Action
Configuration
Local
+
#0 2100S
Bus 0
(0,8) SE AGA TE
(0,9) SE AGA TE
(0,10) SE AGA TE
(0,11) SE AGA TE
(0,12) SE AGA TE
(0,13) SE AGA TE
(0,14) SE AGA TE
+ (0,0,12,0) RAID–5
+
New
3
Select the devices you want to include in the array:
a
To add devices to the array, highlight the device and press
the Spacebar. A check mark appears next to the device to
indicate that it has been selected. You might need to scroll
the display down to view all eligible devices.
b
To remove a previously selected device from the array,
highlight the device and press the Spacebar.
4
When you are finished selecting drives for the new array, select
Done.
Help
Eligible Devices
( 0, 0, 8, 0 ) Sea gate ST34520W
( 0, 0,13, 0 ) Sea gate ST34520W
( 0, 0,14, 0 ) Sea gate ST34520W
Figure 2-16. Eligible Devices Tab
Storage Manager on ROM
Done Can cel
Figure 2-16.
2-27