Compak PKE Instruction Manual page 14

8.
REGULATION
8.1. GRINDER SET UP
Place the hopper ( ) on the grind regulator
( ) and make sure the bean trap (
the closed position. Lock the hopper (
) in place using a flat head screw driver to
gently tighten the hopper security screw
making it match to the hole at the bean
) (Fig. 1).
hopper collar (
Remove the hopper lid (
with coffee ( ), and replace the lid on the
hopper ( ) (Fig. 2).
Plug in the grinder, and place the main
power switch ( ) I - 1 AUTOMATIC / 0 - 0
OFF / II - 2 MANUAL, AUTOMATIC / OFF
/ MANUAL or I / OFF / II to position I - 1
AUTOMATIC, I or AUTOMATIC and open
the bean trap ( ) to allow coffee to pass
into the grind chamber.
14
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 12/02/2021 | K07173H01
) is in
), fill the hopper
Embellisher
Lock
Unlock
Fig. 1