Instalación; Where To Use - Compak PKE Instruction Manual

7.3.

WHERE TO USE

The grinder should be installed on a
flat, stable surface.
The minimum dimensions of
the work space should be as
follows:
Height
Width
Depth
NOTE: The grinder shouldn´t be used in environments (SUCH AS INDUSTRIAL KITCHENS)
where cleaning is done with direct water spray cleaning.
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 12/02/2021 | K07173H01
mm
700
27.55 in
mm
235
9.25
in
mm
420
16.53
in
7.
INSTALACIÓN
• 7.4.
GRINDER INSTALLATION
Before grinder installation, the following
should be considered:
• The grinder information plaque data
coincides with the electrical system
on site.
• The electrical outlet coincides with
the grinder plug.
• The electric power at the location of
installation should meet the minimum
required to properly run the grinder.
• The installation site should have the
proper electrical overload protections.
• The grinder should be properly
grounded as specified by local code.
• This unit is provided with an
equipotential grounding connection
meeting current regulations, to
avoid electrostatic charges. The user
must proceed to connect it between
different equipment or directly to an
earthed line, through the terminal
marked with the symbol
to the standard UNE-EN 60335-2-
102:2016)
(according
13