Board Extraction; Harness Extraction; Figure 6 Remove Heat Sink And Boards; Figure 7 Remove Harnesses - Mellanox Technologies MIS5035Q-2SFC Dismantling Manual

Dismantling Guide
1.8

Board Extraction

1. Disconnect the harness connectors from the boards.
2. Unscrew the Heat-sink screws to remove the Heat-sink.
3. Unscrew the Philips screws and remove spacers to remove the Main board and CPU
Board.
Figure 6 Remove Heat Sink and Boards
1.9

Harness Extraction

Disconnect harness connectors and remove Harnesses from the base.
Figure 7 Remove Harnesses
Mellanox Technologies Confidential
10 of 10
Rev. 1.0
Main board
Heat sink
Management board
These are four
harnesses that
are in the
standard
switches.