Chapter 1 Installing Robot Components; Preparing A Proper Environment For Installation; Ambient Temperature And Humidity; Vibration - Denso HS-G Series Installation & Maintenance Manual

Chapter 1 Installing Robot Components

1.1

Preparing a Proper Environment for Installation

Before installing the robot unit and robot controller, confirm that the operating
environment is in conformity with each item of SAFETY PRECAUTIONS, "Installation
Precautions". Also, take proper measures to protect the components from vibration.
In an inappropriate environment, the robot will not operate to its full capacity or
performance, components may not last long, and unexpected failure may result.
.
1.1.1

Ambient Temperature and Humidity

Keep the ambient temperature between 0C and 40C during operation.
Keep the ambient humidity at 90% or below to prevent dew condensation.
1.1.2

Vibration

Do not install the robot in an environment where it will be exposed to excessive
vibration or impact.
1.1.3

Connecting the Robot Unit and Robot Controller

Before delivery, the robot unit and the robot controller are adjusted to each other as a
set. When two or more robots are to be used, use the robots and robot controllers that
have been adjusted to each other as a set.
Caution: The robot unit and robot controller in a set are given the same serial
number.
1