Supplies For Maintenance; Replacing Fuses And Output Ics - Denso HS-G Series Installation & Maintenance Manual

3.6

Supplies for Maintenance

The table below lists the supplies for maintenance.
Caution
No Name
1 Grease
2 Grease
3 Encoder backup battery set
4 Air filter set
Memory backup battery
5
6 Fuse (1.3A)
7 Fuse (3.2A)
8 IC for output (NPN)
9
IC for output (PNP)
3.7

Replacing Fuses and Output ICs

For the replacing procedures of the fuses and output ICs, refer to the RC7M
CONTROLLER MANUAL, Section 6.6 "Replacing Fuses and Output ICs."
(1) The battery used in this device may present a risk of fire or
chemical burn if mistreated. Do not recharge, disassemble,
heat above 100C (212F), or incinerate.
(2) Dispose of used battery promptly. Keep away from children.
Do not disassemble and do not dispose of in fire.
Supplies for Maintenance
Part No.
410971-0040 2.5 kg can
410971-0050 16 kg can
410679-0010 A set of two batteries (HS-E17500)
410053-0100 For standard type of controllers (FS-1705W)
410053-0110 For global type of controllers (FS-1705)
410076-0261 For RC7M controller
410054-0230 For LM13 for controller I/O
410054-0270 For LM32 for controller I/O
410077-0010 IC (M54522P) for controller output
410077-0020 IC (M54564P) for controller output
51
Remarks
Epinoc Ap-l