Transporting The Overhead-Mount Type (Hss-G Series) - Denso HS-G Series Installation & Maintenance Manual

1.2.2

Transporting the Overhead-Mount Type (HSS-G series)

This section gives the typical installation procedure of the robot unit.
Caution
Step 1
When unpacked, the overhead-mount robot unit is fastened with rope as shown
below. Make sure that the robot's 2nd-axis arm cannot rotate.
(1) Since the robot unit weighs approx. 25 kg (55 lbs), prepare a
crane and forklift with a hoisting load of 0.2 ton or more.
(2) The overhead mounting job must be handled by at least two
persons including a qualified operator for sling, crane and
forklift operation.
(3) Be sure to put on a helmet, safety shoes, and gloves.
Caution: NEVER remove the 2nd-axis arm fixing rope until the
installation of the robot unit is completed.
This is to prevent the robot arm from rotating unexpectedly
due to gravity.
2nd-axis arm
fixing rope
<HSS-G>
6