Wexiodisk WD-12S Installation And User Manual page 48

Operating instructions
Machines without a drain pump
• Check that the machine is in P0 mode.
• Open the hood (5).
• Open the basket conveyor (16), grid sections/grid basket (option) and lock
in place with the clasp (15) at the back edge of the machine.
• Remove the strainer basket (17) and filter tray (11).
• Empty the machine by turning the level pipe (18) a quarter of a turn
anticlockwise.
• Once the tank is empty, take out the level pipe (18).
• Press 0/1 (9) on the panel.
• Close the hood (5).
• Press P3 (8). The display (2) shows "SC" and the internal cleaning process
starts. The other display (4) shows the remaining cleaning time. When the
cleaning process is finished, both the displays show two horizontal dashes
"--".
• Open the hood (5).
• Check that the washing arms' (14) and the rinse pipes' (13) nozzles are
clean and that no objects have fallen and become lodged in the machine.
• Clean the strainer basket (17), filter tray (11), level pipe (18) and pump filter
(19)
• Clean the basket conveyor (16) and any grid sections/grid baskets (option).
• Store the cleaned parts in a washing basket.
• Ensure that the level pipe's rubber sleeve (20) does not become deformed,
by allowing it to hang free.
Machines with a drain pump (option)
N.B! The hood must be open when the drain pump is running.
• Check that the machine is in P0 mode.
• Open the hood (5).
• Open the basket conveyor (16), grid sections (option) or grid basket
(option) and lock it in place with the clasp (15) at the back edge of the
machine.
• Remove the strainer basket (17), filter tray (11) and the level pipe (18) and
clean them.
• Press the 0/1 button (9).
• Empty the machine. Start the drain pump using button P1 (6). "dP" is
shown on one display (2) and the other display (4) shows the remaining
emptying time. The water in the washing tank is pumped to the drain. The
pump stops automatically after a set time.
• Once the tank is empty, take out the pump filter (19).
• Close the hood (5).
• Press P3 (8). The display (2) shows "SC" and the internal cleaning process
starts. The other display (4) shows the remaining cleaning time. When the
cleaning process is finished, both the displays show two horizontal dashes
"--".
• Open the hood (5). Check that the nozzles on the washing arms and rinsing
pipes (14, 13) are clean and that no objects have fallen and become lodged
in the machine.
• Clean the basket conveyor (16) and any grid sections/grid baskets (option).
• Store the cleaned parts in a washing basket.
• Ensure that the level pipe's rubber sleeve (20) does not become deformed,
by allowing it to hang free.
WD-12S
44
Rev. (202103)