Wexiodisk WD-12S Installation And User Manual page 52

Operating instructions
CODE CAUSE
IF30 Low water level in the washing tank
before washing.
The level pipe's rubber sleeve is leaking.
IF34 The detergent alarm.
The machine has run out of detergent.
IF35 The washing tank has not been filled
with water.
Er96 The motor safety cut-out for the pump
has tripped.
Er97 One digital input is shorted to ground.
Er98 Communication fault between the CPU
and the panel card.
Er99 Communication fault between the
computer and panel cards.
WD-12S
ACTION
Check that the level pipe is closed. The alarm can be
reset by pressing 0/1 on the panel.
Check that the level pipe's rubber sleeve has not been
damaged.
The alarm can be reset by pressing 0/1 on the panel.
Check the amount of detergent and refill, if necessary.
Open and close the hood to start the filling process. The
alarm can be reset by pressing 0/1 on the panel.
Contact service personnel.
Contact service personnel.
The alarm can be reset by pressing 0/1 on the panel.
Contact service personnel if the alarm recurs.
The alarm can be reset by pressing 0/1 on the panel.
Contact service personnel if the alarm recurs.
48
Rev. (202103)