Table of Contents
Advertisement
Configuration and Operation
To configure RS-485 settings
1. From the Protocol drop-down menu, select PelcoD or PelcoP. The default is PelcoD.
2. From the Baudrate drop-down menu, select the desired baud rate. The default is 2400.
3. The Data bits field is disabled.
4. The Parity field is disabled.
5. The Stop bits field is disabled.
6. In the ID number text box, enter the ID number (1-254). The ID number is provided by the camera
according to the camera model, protocol and dipswitch settings. The default is 1.
7. Click SAVE.
5.8
Log Out
Selecting the Logout link on the Home page to close the session. The following message appears:
Upon clicking Login, the Login dialog box opens.
Quasar CP-6302 Range User Guide - Ver. 8 - January 31, 2021
Login Message
This document does not contain any export-controlled information.
95
Advertisement
Table of Contents
