Ddns - FLIR Quasar Gen III CP-6302 Series User Manual

Table of Contents

Configuration and Operation

Note:

To enable this function, make sure that your router supports UPnP and that it is activated.

Friendly name – Enter the name for the camera for identification.

Click SAVE when finished.

5.3.3.5

DDNS

Dynamic Domain Name System (DDNS) allows a host name to be constantly synchronized with a

dynamic IP address. This permits those using a dynamic IP address to be accessed by a static domain

name. DDNS configuration settings are entered in the System > Network > DDNS screen:

To use DDNS

1. Select the Enable DDNS checkbox.

2. From the Provider drop-down list, select a DDNS host provider name.The default setting is

DynDNS.org (Dynamic).

3. In the Host name text box, enter the registered domain name.

4. In the Username/E-mail text box, enter the username or e-mail address required by the DDNS

provider for authentication.

5. In the Password/Key text box, enter the password or key required by the DDNS provider for

authentication.

6. Click SAVE when finished.

Quasar CP-6302 Range User Guide - Ver. 8 - January 31, 2021

DDNS Screen

This document does not contain any export-controlled information.

Table of Contents