Picture Adjustment; Advanced Picture Settings - FLIR Quasar Gen III CP-6302 Series User Manual

Configuration and Operation
·
Gain – A nominal video signal level is usually 1-volt peak-to-peak for composite video, 0.7 volts
for component or RGB video, or 0.3 volts for the chrominance subsection, at which level a fully
saturated picture is transmitted to the acceptor. However, for cases where the video signal is
attenuated, a low-noise, high-gain analog amplifier is built into quality video processing
equipment. This amplifier provides video gain control whereby the video signal can be boosted or
reduced. Dark pictures caused by low level lighting are easily adjusted. The Gain drop-down
menu turns the video gain Off or moves it in steps from 1 to 9.
5.6.2

Picture Adjustment

Adjustment of some qualities of the video is made possible by selecting Picture Adjustment in the
Camera tab. Brightness, Sharpness, Contrast, Saturation and Hue may all be adjusted via drop-down
menus from this window, as shown below.
Brightness
You can adjust the image's brightness by adjusting this parameter. Select from the range between -12 to
+13. To increase video brightness, select a larger number. The default setting is DEFAULT. The setting is
applied automatically.
Sharpness
Increasing the sharpness level can make the image look sharper, especially enhancing the object's edge.
Select from the range between 0 to +15. The default setting is DEFAULT. The setting is applied
automatically.
Contrast
Camera image contrast level is adjustable. Select from a range of -6 to +19. The default setting is
DEFAULT. The setting is applied automatically.
Saturation
Camera image saturation level is adjustable. Select from a range of -6 to +19. The default setting is
DEFAULT. The setting is applied automatically.
Hue
Camera image hue level is adjustable: select from a range of -12 to +13. The default setting is DEFAULT.
The setting is applied automatically.
5.6.3

Advanced Picture Settings

The Advanced Picture Settings screen is used configuring the following settings:
White Balance
Quasar CP-6302 Range User Guide - Ver. 8 - January 31, 2021
Picture Adjustment Screen
Backlight WDR Function
Compensation
This document does not contain any export-controlled information.
Noise Reduction Settings
82