Http - FLIR Quasar Gen III CP-6302 Series User Manual

Configuration and Operation
For each server, enter the server IP address, server port number, user name, password, and remote
folder path. Settings are entered in the System > Network > FTP screen:
To use passive mode, select the 1st FTP passive mode or 2nd FTP passive mode checkbox for the
respective server. In passive mode, FTP the client initiates both connections to the server, solving the
problem of firewalls filtering the incoming data port connection to the client from the server.
In order to support passive mode FTP on the server-side firewall, the following communication channels
must be opened:
·
FTP server's port 21 from anywhere (client initiates connection)
·
FTP server's port 21 to ports > 1023 (server responds to client's control port)
·
FTP server's ports > 1023 from anywhere (client initiates data connection to random port
specified by server)
·
FTP server's ports > 1023 to remote ports > 1023 (server sends ACKs and data to client's data
port)
Click SAVE when finished.
5.3.3.8

HTTP

An HTTP notification server detects notification messages of triggered events sent from cameras. HTTP
notifications are set by selecting the Send HTTP notification checkbox on the
Quasar CP-6302 Range User Guide - Ver. 8 - January 31, 2021
FTP Screen
This document does not contain any export-controlled information.
Motion Detection screen.
31