Table of Contents
Advertisement
Section 4 Troubleshooting
Troubleshooting Guide
Problem
Red LED in front of
enclosure is OFF
Green LED in front
of enclosure is OFF
Green LED in front
of enclosure is not
blinking
Owner's Manual for Power Zone Connectivity Server
Solution
Verify 12 V
power and ground wires are connected properly on PWR_RS485 connector to
the Power Zone Pro Main Controller BS6 connector.
Verify the RS-485 wires are connected properly on PWR_RS485 connector to the Power
Zone Pro Main Controller BS6 Connector.
Operating system or application is not working properly. Unplug and plug back the
PWR_RS485 cable to the Connectivity Server.
Troubleshooting
45
Hide quick links:
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Products for Generac Power Systems Power Zone PZCONSVR
- Generac Power Systems Power Zone Pro
- Generac Power Systems Power Zone 410
- Generac Power Systems Power Zone Pro Sync
- Generac Power Systems Power Transfer System with Dual Load Manager
- Generac Power Systems PowerBOSS 8000 PowerMaster
- Generac Power Systems PowerBOSS 5500 Storm-Plus
- Generac Power Systems PowerBOSS Contractor 1648-0
- Generac Power Systems PowerBOSS Storm-Plus 1642-0
- Generac Power Systems Power Washer
- Generac Power Systems PowerManager 004975-2
- Generac Power Systems PowerManager 005039-1
- Generac Power Systems PowerManager 005047-1
- Generac Power Systems PowerMaster
- Generac Power Systems PowerPact 7.5 kW
- Generac Power Systems PowerMate 1020
- Generac Power Systems PowerManager PM-PC
Need help?
Do you have a question about the Power Zone PZCONSVR and is the answer not in the manual?