Bluetooth Setup; Turn Bluetooth Off Or On - Generac Power Systems Power Zone PZCONSVR Owner's Manual

Connectivity server
Table of Contents

Advertisement

Installation and Operation
Click
"Apply
Changes"
7.
Connectivity Server in Hotspot mode with the
settings selected.
A
B
C
D
G
H
Figure 3-69. HotSpot Tab
The Connectivity Server can be in one of three modes
exclusively:
Off
Client
Hotspot
Turn Wi-Fi OFF or ON
See
3-70. In either Client or HotSpot tab,
1.
Figure
check the "Wi-Fi Enabled" checkbox (A) to turn Wi-
Fi ON and uncheck to turn OFF.
NOTE: Wi-Fi and Bluetooth cannot be enabled at the
same time.
A
Figure 3-70. Toggle Wi-Fi
32
(H)
to
place
the
E
F
007575
007580

Bluetooth Setup

A network connection can be made between the
Connectivity Server and a laptop, tablet, or smartphone
using Bluetooth. The Power Zone Connectivity Server
acts as the host and offers networking service to the
connected device. With this connection, the web browser
on the connected device can be used to view the Power
Zone Application remotely.
The Bluetooth setup consists of three steps:
Turning on Bluetooth on both devices
Pairing
Performing a separate connect action from each
connected device.

Turn Bluetooth OFF or ON

To get to the screen shown in
1.
Settings
Communications
Bluetooth.
Check the "Bluetooth Enabled" checkbox (A) to
2.
enable or disable Bluetooth.
Select the "Apply" button (B).
3.
Follow the connecting device instructions to turn
4.
Bluetooth ON.
NOTE: Wi-Fi and Bluetooth cannot be enabled at the
same time.
A
B
Figure 3-71. Turn OFF/ON and Pair Bluetooth Device
Connect and View Power Zone App on Web
Browser of Connected Device
A user initiated action is required to connect the two
Bluetooth devices. The action consists of executing steps
on the guest device. The Connectivity Server is the host.
Each operating system has different procedures to
establish a network connection between the Connectivity
Server and device. The following procedure is based on
Windows 7 operating system (OS).
See
3-72. Locate and select device that
1.
Figure
represents the Connectivity Server (A).
Owner's Manual for Power Zone Connectivity Server
3-71, go to:
Figure
Ethernet/Wi-Fi/
010448

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Power Zone PZCONSVR and is the answer not in the manual?

This manual is also suitable for:

10000039844

Table of Contents