Units Of Measure; Date/Time; Health Checkmark - Generac Power Systems Power Zone PZCONSVR Owner's Manual

Figure 3-12. Language Selection

Units of Measure

To set the units of measure go to the
choose "User". A selection for "Units of Measure" will
appear on the right side of the screen. Checking the
"Save" button will save the selection. Checking the "Set
As Default" will apply the selection to the Built-in Display
and all new remote users.
Figure 3-13. Units of Measure

Date/Time

The system date and time can be set from the
icon. Navigate to Setup
Changing the date/time on the Connectivity Server
means a change to the "System Time" and this will
eventually change all other connected equipment
(displays and modules) in the system. This will affect
timestamps of data and execution of calendar based
commands.
Owner's Manual for Power Zone Connectivity Server
007522
icon and
(E) Setup
(E) Setup
Calendar Date/Time.

Health Checkmark

See 3-15. The checkmark indicates the system is
Figure
healthy.
007523
Figure 3-15. System is Healthy (Green)
See
Figure 3-16,
the generator has an alarm or warning status, the
checkmark will change to indicate the level of fault.
Installation and Operation
Figure 3-14. Date/Time
007524
and
Figure 3-17 Figure
009630
3-18. When
13