Bluetooth Connection; Ethernet Connection; Home Screen - Generac Power Systems Power Zone PZCONSVR Owner's Manual

i
%
/kWh
Figure 3-3. Network Info and System Details
Select the SSID (Service Set Identifier) on the
4.
mobile device or PC's Wi-Fi list. Enter the network
password.
NOTE: The default Wi-Fi password ("generac123") can
changed.
Once connected, open a web browser (Google
5.
Chrome preferred) on the mobile device or PC and
enter the following Wi-Fi IP address in the top bar
of the browser:
– 192.168.25.1

Bluetooth Connection

Turn on Bluetooth on the mobile device or PC and
1.
Select "Scan" or "Pair".
Select the Power Zone BlueTooth device name on
2.
the mobile device or PC's Bluetooth list.
Once connected, open a browser (Google Chrome
3.
preferred) on the mobile device or PC and enter
the following Wi-Fi IP address 192.168.25.1 in the
top bar of the browser.
Owner's Manual for Power Zone Connectivity Server

Ethernet Connection

See
1. Figure
Ethernet IP Address is required. This information
can be accessed via the Power Zone Pro Main
Controller "System Details" menu and by selecting
"Network Info" (C).
NOTE: The IP address and subnet mask on your PC's
Ethernet port must be set to a fixed IP address in the
same subnet range as the IP address of the connectivity
server.
Connect Ethernet cable from the Connectivity
2.
Server to the PC.
Open a web browser (Google Chrome™ preferred)
3.
and enter the Ethernet IP address in the top bar of
the browser. After a few minutes, the web browser
should display the Generac app.

Home Screen

See 3-4. This screen displays bar graphs for the
Figure
most common measurements, and an overall health
check for the generator. The number of displayed
measurements will change depending on whether or not
the generator is running.
010067
Installation and Operation
3-3. To connect via Ethernet, the
Figure 3-4. Home
007630
9