Parameters/Address Space; Parameters - Siemens SIMATIC ET 200eco PN M12-L Manual

Parameters/address space

4.1

Parameters

Parameters
The following table shows the parameters that you can set for each port (each submodule) of
the IO-Link master CM 8xIO-Link + DI 4x24VDC M12-L.
Table 4- 1
Parameters
Diagnostics
Diagnostics: Missing 2L+
Diagnostics undervoltage 1L+
Diagnostics: Port
Hardware interrupt (device
notification)
Port configuration
Port configuration without S7-
PCT
Operating mode
Vendor ID**
DeviceID*
Communication module CM 8x IO-Link + DI 4x24VDC M12-L (6ES7148-6JG00-0BB0
Equipment Manual, 09/2020, A5E49284833-AA
Diagnostics and port parameters
Value range
• Disable
• Enable
• Disable
• Enable
• Disable
• Enable
• Disable
• Enable
• Disable
• Enable
• IO-Link autostart
• IO-Link manual
Vendor ID of the
connected IO-Link
device
Device ID of the con-
nected IO-Link device
Default Scope with configu-
ration software, e.g.
STEP 7 (TIA Portal)
Disable Channel
Disable Channel
Disable Channel
Disable Channel
Disable Channel
0 Channel
0 Channel
Channel
4
21