Technical Specifications - Siemens SIMATIC ET 200eco PN M12-L Manual

Technical specifications

Technical specifications of the CM 8xIO-Link + DI 4x24VDC M12-L communication module
The following table shows the technical specifications as of 09/2020. You can find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/de/en/pv/6ES7148-6JG00-0BB0/td?dl=de).
Article number
General information
HW functional status
Firmware version
• FW update possible
Vendor identification (VendorID)
Device identifier (DeviceID)
Product function
• I&M data
• Prioritized startup
Engineering with
• PROFINET from GSD version/GSD revision
Supply voltage
Load voltage 1L+
• Rated value (DC)
• permissible range, lower limit (DC)
• permissible range, upper limit (DC)
• Reverse polarity protection
Load voltage 2L+
• Rated value (DC)
• permissible range, lower limit (DC)
• permissible range, upper limit (DC)
• Reverse polarity protection
Input current
Current consumption (rated value)
from load voltage 1L+ (unswitched voltage)
from load voltage 2L+, max.
Encoder supply
Number of outputs
24 V encoder supply
• Short-circuit protection
Communication module CM 8x IO-Link + DI 4x24VDC M12-L (6ES7148-6JG00-0BB0
Equipment Manual, 09/2020, A5E49284833-AA
6ES7148-6JG00-0BB0
FS01
V1.0.x
Yes
002AH
0306H
Yes; I&M0 to I&M3
Yes
GSDML V2.3.x
24 V
20.4 V
28.8 V
Yes; Against destruction; encoder power supply
outputs applied with reversed polarity
24 V
20.4 V
28.8 V
Yes; against destruction
70 mA; without load
12 A; Maximum value
12 A; Maximum value
8
Yes; per channel, electronic
6
35