Assemble The Cisco Webex Wireless Phone 860 Multicharger Base - Cisco Webex 800 Series User Manual

Assemble the Cisco Webex Wireless Phone 860 Multicharger Base

Assemble the Cisco Webex Wireless Phone 860 Multicharger Base
You can insert up to four desktop charger modules into the multi charger base. You can use any combination
of the Cisco Webex Wireless Phone 860 Desktop Dual Charger Modules and Cisco Webex Wireless Phone
860 Desktop Battery Charger Modules as desired.
Caution Use only the power supply that comes with the multicharger base.
Red and green LEDs blink at powerup.
Before you begin
Ensure that the power supply has the correct plug for your area.
Procedure
Step 1
Place the multicharger base on a flat surface within reach of power outlet.
Step 2 Insert the tabs on the back of the desktop charger module into the slots on the base.
Step 3
Rock the desktop charger module forward and use the front tab to snap it into place.
Cisco Webex Wireless Phone 800 Series User Guide
102
Accessories