Turn Off Your Phone; Self Care Portal; Hardware, Buttons, Screen, And Apps; Hardware And Buttons - Cisco Webex 800 Series User Manual

Your Phone

Turn Off Your Phone

Power off the phone when you don't need it.
Note Don't remove the battery to power off the phone.
To replace the battery, power off the phone and then remove the battery, or for Cisco Webex Wireless Phone
860, use the hot swap technique.
Procedure
Step 1 Press and hold the Power button.
Step 2
Tap Power off
Related Topics

Self Care Portal

The Self Care portal is part of your organization's Cisco Unified Communications Manager, which you access
from your computer. Your administrator gives you the URL to access the Self Care portal, and provides your
user ID and password. You can customize only the call forward feature with the Self Care portal website. To
customize all other features, use your phone.

Hardware, Buttons, Screen, and Apps

Your phone's hardware, buttons, screens, and apps are similar to that of a consumer-grade smartphone or other
Android device. However, since your phone is a managed device, your organization may configure certain
limitations or allowances on the phone.

Hardware and Buttons

Your wireless phone has many hardware features and buttons that you use regularly.
Although the Cisco Webex Wireless Phone 840 and Cisco Webex Wireless Phone 860 are different sizes, the
hardware and buttons perform the same actions. However, the hardware features and buttons are not in the
same location on the phones. Another difference between the phones is that the Cisco Webex Wireless Phone
840 doesn't have a Fingerprint button.
Cisco Webex Wireless Phone 840 Hardware and Buttons
The following figure shows the Cisco Webex Wireless Phone 840 and 840S with a barcode scanner.
.
Hardware and Buttons, on page 7
Battery Hot Swap for 860 Phones, on page 34
Cisco Webex Wireless Phone 800 Series User Guide
Turn Off Your Phone
7