Push To Talk App; Push To Talk Overview - Cisco Webex 800 Series User Manual

Push to Talk App

•
•
•
•
•
•
•
•
•

Push to Talk Overview

If enabled by the system administrator, your phone can operate in a group broadcast mode that is called Push
to Talk (PTT). In PTT mode, the phones behave like walkie-talkies. Your phone transmits audio over a built-in
speakerphone and recipients can respond to your message.
The system administrator subscribes you and others to any of the 25 normal channels that are available. The
administrator may give you permission to receive, and optionally send, PTT broadcasts in your subscribed
channels. The administrator creates a label for channels to help you identify PTT channels. The default label
for channel 1 is ALL. Examples of normal channels in a hospital setting may be: Channel 2: Maintenance,
Channel 3: Hospital Admitting, and Channel 4: IT Helpdesk.
Your phone alerts you to PTT transmissions from normal channels, the priority channel, and the emergency
channel. Your phone receives PTT transmissions differently depending on whether you are on an active call.
• If you are not in a call, you automatically hear the PTT beep and the audio broadcast.
• If you are in a phone call, you do not hear the PTT beep or audio broadcast.
Note If you are on a call and see the PTT notification, you may join the broadcast, which would put your call on
hold.
Push to Talk Overview, on page 67
Access PTT App, on page 68
Change the Default PTT Channel, on page 69
Change Channel Subscriptions, on page 70
Send a PTT Broadcast, on page 70
Change the PTT Volume, on page 71
Ignore a PTT Broadcast, on page 71
Answer a Phone Call During a PTT Broadcast, on page 71
Start a Phone Call During PTT Broadcast, on page 71
C H A P T E R
Cisco Webex Wireless Phone 800 Series User Guide
5
67