Raco Schwelm T6C2 Translation Of The Original Instruction page 38

Cylinder Settings:
Cylinder max. Stroke (mm):
Number of Turns for max Stroke:
Clockwise or Counter
Clockwise direction:
External Reference Function:
Set zero position:
Read Parameter Block:
Send Parameter Block:
Absolute position:
Reed switch sector:
Speed:
Revision: 05
Nominal stroke length of the purchased actuator in millimeters.
This value represents the number of rotations at the EPS02
sensor head to account for the full nominal stroke of the actua-
tor.
Indicates the direction of rotation of the sensor.
If an external reference switch is used, this selector box will be
enabled. The positive edge of the external reference switch will
set the absolute position to 0mm.
inputs are displayed in the control fields for Push Button,
Input 1 to Input 3 and Temperature.
The absolute position will be set to 0mm.
Parameters from the EPS02 will be send to the RACO Tool.
Parameters from the RACO Tool will be saved in the EPS02.
The actual position of the actuator is shown.
The reed switch sector display block is for diagnostic and func-
tional supervision of the imbedded reed switches.
Displays the RPM value on the sensor head.
5.2-7/11
The states for the respective
154-625-2