Table of Contents
Advertisement
54 Appendix B: Technical information
Base board input and output connectors
The Matrox Morphis QxT board has several interface connectors. On its bracket,
it has an HD-44 connector for video input and an HD-15 connector for video
output. On the top edge of the board, there is a 50-pin digital I/O connector for
I/O from the Matrox Morphis QxT digital I/O module. In addition, there is one
system reset connector.
Video input
connector
Video output
connector
Video input connector
The video input connector is a high-density 44-pin female connector, used to
access video input signals. The connector's pin assignment is as follows:
Reserved
15
30
44
31
Digital I/O connector
1
16
Watchdog reset
connector
Advertisement
Table of Contents
