Table of Contents
Advertisement
6
5
Position your RTMac card over
the PCI slot you've chosen, and
properly align the connectors
with the slot.
6
Push the card in firmly and
evenly until it's fully seated in its
slot.
7
Re-insert the port access screw to
secure your card to the computer
frame.
8
Close the side panel making sure
it snaps into place, and reconnect
the power cord.
Connecting your Matrox RTMac breakout box
To connect your Matrox RTMac
breakout box cable:
1
Plug the end labelled
RTMAC BOARD
on your RTMac card labelled
VIDEO
2
Plug the other end, labelled
RTMAC/BOB/CBL
RTMac breakout box.
Chapter 2, Installing Your RTMac and Connecting Your Devices
TO
into the socket
.
, into the
Advertisement
Table of Contents
