Connecting video
sources
Connecting devices to Matrox Morphis QxT
The Matrox Morphis QxT has two connectors on its bracket:
44-pin video input
connector
15-pin video output
connector
• A high-density DB-44 female connector for video input.
• A high density 15-pin female connector for video output.
To connect a video source to your Matrox Morphis QxT, plug the
HD-44M-18BNC cable into the DB-44 video input connector. Connect your
video sources to the BNCs at the other end of the cable.
The BNC connectors of the HD-44M-18BNC cable correspond to the following
signals.
BNC label
Signal
CH-0
P0_VID_IN
CH-1
P1_VID_IN
Connecting devices to Matrox Morphis QxT
Video device to connect
Analog video input for acquisition path 0.
Analog video input for acquisition path 1.
23