Mast Strip Adjustment
Mast strip clearance adjustment
FV mast
FSV mast
(1) Lower the inner (or middle) mast fully.
(2) With the inner (or middle) mast in contact with the outer mast roller (or middle mast upper roller),
measure the clearance between the mast strip and mast.
Standard: E
If the standard is not satisfied, make adjustment by changing the mast strip shim thickness.
Shim thickness: 0.5 and 1.0 mm (0.020 and 0.039 in)
(3)
After the adjustment, check the mast for smooth movement.
mm
0.5
1.0
(0.020
Bring into contact
Bring into contact
0.039 in)