Toyota 30 Series Manual page 96

Lift Cylinder for V Mast
2
4
*
Cylinder cover
ton series:
2
-
T
230 265 (2345
Disassembly Procedure
1 Remove the safety down valve.
Remove the cylinder cover. [Point 11
2
Remove the seals from the cylinder cover
3
Remove the piston rod. [Point 21
4
Remove the seals on the piston rod
5
Remove the check valve from the piston rod. [Point 31
6
Remove the cylinder. [Point 41
7
Reassembly Procedure
The reassembly procedure is the reverse of the disassembly procedure.
Note:
Apply MP grease or hydraulic oil on the packing, O-ring, and dust seal lip portion.
Apply sealant (08833-00080) on the threaded portion of the cylinder cover before tightening.
- -
2703) 70
3 ton series:
-
T
264 305 (2695 3 1 10)
T
=
2
4
-
75