Toyota 30 Series Manual page 64

2. Clearance between outer mast roller and inner mast
Adjust the mast overlap to approx. 450 mm (1
Shift the inner mast to one side to bring the roller into
contact with the outer mast, and inspect the clearance
between the roller side face and mast where they are the
closest.
=
Standard: B
If the standard is not satisfied, make adjustment by chang-
ing the outer mast roller shim thickness.
Shim thickness: 0.5 and 1.0 mm (0.020 and 0.039 in)
(3) Distribute shims equally to the rollers on the left and right
side.
(4) After the adjustment, see that the inner mast moves
smoothly in the outer mast.
These rollers
Outer
mast
mast
-
0.5 mm (0 0.020 in)
in).
7.72