Toyota 30 Series Manual page 101

Rear Lift Cylinder for
Disassembly Procedure
Remove the safety down valve.
1
Remove the cylinder cover. [Point
2
Remove the seals from the cylinder cover.
3
Remove the piston rod. [Point 21
4
Remove the piston seals, and the check valve. [Point 31
5
Remove the cylinder. [Point 41
6
Reassembly Procedure
The reassembly procedure is the reverse of the disassembly procedure.
Note:
Apply MP grease or hydraulic oil on the packing, O-ring, and dust seal lip portion.
Apply sealant (08833-00080) on the threaded portion of the cylinder cover before tightening.
FSV
Mast
ton series and
2
*Cylinder cover:
ton series T
2 = 230
ton series T
3 = 237
ton series
3
-
265 (2345 2702) [I70
-
-
305 (241 9 3 1 10) [ I 75
T
=
RH
-
-