Removing The Compact Starter From A Level Surface (Screw Fastening) - Siemens SIRIUS 3RA6 System Manual

3RA61/3RA62 compact starter
5.4 Installing/removal
5.4.2.2

Removing the compact starter from a level surface (screw fastening)

Requirements
● The compact starter must be switched off (actuator set to
● The control current terminals must have been disconnected.
Procedure
Note
The compact starter can be removed from the wall with the wiring still in place (permanent
wiring), i.e. there is no need to disconnect the main circuit terminals.
68
DANGER
Hazardous voltage!
Will cause death or serious injury.
Removing the compact starter while the system is live can damage the compact starter
and can also result in an electric shock.
Before starting work, disconnect the system and the device from the power supply.
OFF position).
SIRIUS 3RA6 compact starter
System Manual, 09/2014, NEB560060102000/RS-AA/006