Service; Introduction; Malfunction (E.g. End Of Service Life Reached) - Siemens SIRIUS 3RA6 System Manual

Service

8.1

Introduction

The SIRIUS 3RA6 compact starter and SIRIUS infeed system for 3RA6 have been designed
to be maintenance-free.
8.2

Malfunction (e.g. end of service life reached)

The SIRIUS 3RA6 compact starter features a patented mechanism for detecting
malfunctions. If a malfunction is detected, it could mean, for example, that the compact
starter has reached the end of its service life.
For additional information, please refer to " Shutdown on malfunction (Page 61) ".
Instructions for dealing with malfunctions, e.g. end of service life reached
Compact starter malfunction!
A compact starter malfunction will cause the compact starter to shut down. Continuing to
operate the compact starter is extremely risky, as it can no longer be considered reliable.
Following a shutdown caused by a malfunction, you will need to replace the compact
starter.
If the SIRIUS 3RA6 compact starter shuts down following a malfunction (e.g. end of service
life), you will need to replace it.
In order to achieve a safe system status for the purpose of replacing the compact starter,
you can continue operating the compact starter for a short time. For this purpose, you will
have to set the compact starter to "ready" again by turning the actuator to the
position and then to the
Note
Following a malfunction (e.g. end of service life), the white display will be retained in the
"RLT 0%" display window and you will not be able to reset it. The compact starter must be
replaced.
For additional information on replacing the SIRIUS 3RA6 compact starter, please refer
to " Replacing the compact starter (Page 242) ".
SIRIUS 3RA6 compact starter
System Manual, 09/2014, NEB560060102000/RS-AA/006
WARNING
READY position.
8
OFF
241