Siemens SIRIUS 3RA6 System Manual page 71

When removing a reversing starter, you will need to insert two screwdrivers into the
neighboring openings at the same time.
Step
1
2
3
SIRIUS 3RA6 compact starter
System Manual, 09/2014, NEB560060102000/RS-AA/006
Instructions
Insert 2 screwdrivers into the opening
above the reversing starter.
Tilt the screwdrivers to the right and
then down (see arrow on enclosure lid)
so that you can push the reversing
starter forwards by approx. 5 mm.
Move the reversing starter forwards to
remove it from the screw-type infeed or
extension block.
3RA61/3RA62 compact starter
Image
5.4 Installing/removal
71