Siemens SIRIUS 3RA6 System Manual page 149

Procedure
Step
1
2
3
4
5
SIRIUS 3RA6 compact starter
System Manual, 09/2014, NEB560060102000/RS-AA/006
Instructions
Turn the actuator to the
position.
Plug the control kit into the connection
point (2a), inserting it from the bottom at
an angle. Tilt the control kit up (2b) until
it makes contact with the compact
starter. Then pull the control kit forwards
and away from the compact starter until
it locks into position (2c).
Checking the main and auxiliary circuit
wiring:
Use the actuator to switch the compact
starter on ( READY) or off (
and check the main and auxiliary circuit
wiring.
Turn the actuator to the
position.
Release the latch mechanism (5a).
Push the control kit backwards and then
tilt it down (5b). Remove the control kit
from the compact starter by pulling it
down at an angle (5c).
Image
OFF
OFF)
OFF
Accessories
7.5 Control kit
149