Parameter "Operation At Preset <> Actual Configuration - Siemens SIRIUS 3RA6 System Manual

3RA64/3RA65 compact starter with IO-Link
6.4 Parameters
6.4.3 Parameter "Operation at Preset <> Actual Configuration"
Parameter "Operation at Preset <> Actual Configuration"
The "Operation at Preset <> Actual Configuration" parameter determines whether or not the
types of starter of the ACTUAL configuration are to be compared with those of the PRESET
configuration.
The table below shows the values for the "Operation at Preset <> Actual Configuration"
parameter.
Table 6- 3
Value
0
1
If you parameterize 3 or fewer starters in a starter group, the "Operation at Preset <> Actual
Configuration" parameter is automatically set to the value 0.
Note
The number of configured compact starters is checked continuously, regardless of the
"Operation at Preset <> Actual Configuration" parameter value.
You can find more information on the data sets in " Data sets for the 3RA64/3RA65 compact
starter with IO-Link (Page 293)".
108
Parameter "Operation at Preset <> Actual Configuration"
Description
Operation at Preset <> Actual Configuration:
disable
Operation at Preset <> Actual Configuration:
enable
Default setting
disable
—
SIRIUS 3RA6 compact starter
System Manual, 09/2014, NEB560060102000/RS-AA/006