Advanced Telephone Functions - Unify Openstage 15 Manual

2. Now enter the phone number for the person you wish to transfer the call to and confirm with
[OK]. Wait for the other party to answer and announce the call.
3. The phone display now again shows various options. Using the navigation keys please
select Transfer? and confirm with [OK].
The call has been successfully transferred with announcement.
1.9. Unattended call transfer
1. During an active call the phone display will show various options. Using the navigation
keys please select Unannounced transfer? and confirm with [OK].
2. Now enter the phone number for the person you wish to transfer the call to and confirm with
[OK].
The call has been successfully transferred without announcing.
1.10. Completion of Calls on No Reply (CCNR)
The Completion of Calls on No Reply (CCNR) creates a callback in case a person cannot be
reached (e.g. the person is not on its desk or busy) at the moment.
To use this function, the CCNR function has to be
enabled in the administration portal and in the phone
extension. Click on the CCNR check box under
Administration / Profile to activate the function.

2. Advanced telephone functions

2.1. Function keys & codes
The service site (also refer to
functions to the function keys (varies by phone model, up to 14 function keys over 2 levels):
Assignment of the function keys
Standard settings (i.e. no programming): Local Loop
Incoming calls are indicated respectively by the first LED (set to local loop) flashing.
When the call is answered the LED stays lit.
If a second call comes in during this call, the second LED flashes.
By pressing the key next to the flashing LED, the first call is automatically placed on hold
and the second call answered.
You can now toggle between the calls by pressing the key next to the flashing or steady lit
LED. In this manner, you can make a total of five calls at the same time.
Extension / telephone number
You can add any extension or telephone number to the busy lamp field.
- You can start a call by pressing the respective busy lamp key. If an internal extension is
programmed, you can see whether that extension is currently busy:
administration portal manual) allows you to program the following