Using The Receiver - Unify Openstage 15 Manual

- Enter the phone number and press [OK].
Calling a number from the call list:
Unify OpenStage 15, OpenStage 20 and OpenStage 40
- Press the mail box key
- Use the navigation key to select "Calls" and confirm with [OK].
- You may now select from the following call lists: "Missed", "Dialled", "Received" and
"Forwarded". Use the navigation keys to select the respective call list and press [OK] to
confirm.
- The entries in the respective call list will be displayed. Use the navigation keys to select the
respective entry and lift the receiver.
- To start the call press [OK].
Unify OpenStage 60
- Press the call list key
- You may now select from the following call lists: "Missed", "Dialled", "Received" and
"Forwarded". Repeatedly pressing the call lists key
lists (tabs).
- After selecting the respective call list (tabs) you will see the entries in the respective call list.
Use the navigation keys to select the respective entry and lift the receiver.
- To start the call press [OK].
Dialling numbers via function keys (except Unify OpenStage 20):
- Press the respective function key on your phone to place a call.
For information about options you may program to your function keys please refer to
Function keys".
For information about configuring your extension please refer to
1.3. Incoming call
There are various options for answering a call:

Using the receiver

- Lift the receiver.
.
.
will successively select the various call
administration portal
„2.1.
manual.