Netvanta 3430 Front Panel Design - ADTRAN NetVanta 3458-PoE Hardware Installation Manual

NetVanta 3000 Series Hardware Installation Guide
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in
transit, immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to the
Warranty, Repair, and Return section of the Support page on the ADTRAN website at
http://www.adtran.com/support).
Domestic Shipping Contents
Shipments of the NetVanta 3430 domestic units include the following items:
• NetVanta 3430 base unit
• AOS documentation bundle
• Rackmount brackets
• Wallmount bracket (P/N 1202820G1 only)
• 4 rubber mounting feet
• Power cord
International Shipping Contents
Shipments of the NetVanta 3430 international units include the following items:
• NetVanta 3430 base unit
• AOS documentation bundle
• Rackmount brackets
• Wallmount bracket (P/N 1202820G1 only)
• 4 rubber mounting feet
• All necessary power cords
Option module shipping contents are given in
page
The NetVanta 3430 ships with a 128 MB SODIMM installed. It can be upgraded to
provide a maximum of 512 MB of memory.
There are three types of SODIMM memory modules used by ADTRAN: 200-pin DDR1,
200-pin DDR2, and 144-pin DDR2. Although these modules look very similar, they are
not interchangeable. Refer to
correct upgrade module for your ADTRAN product.

NetVanta 3430 Front Panel Design

The NetVanta 3430 front panel is shown below. Front panel LED descriptions are given in
In addition to the LEDs, this front panel contains a
compressed code storage. ADTRAN supports only ADTRAN-provided CompactFlash (16 MB to 1 GB) (refer
to the list of part numbers on the front cover). Refer to
61200860L1-34AA
54.
Copyright © 2010 ADTRAN, Inc.
Option Module Shipping Contents on
http://www.adtran.com
slot for nonvolatile configuration storage and
CompactFlash
Installing a CompactFlash Card on page
Physical Descriptions
to make sure you purchase the
Table 1 on page 52.
98.
37