Physical Descriptions
NetVanta 3305 Rear Panel Design
The NetVanta 3305 rear panel is shown below with modules installed.
pinouts.
NetVanta 3305 Rear Panel Interfaces and LEDs
NET/DBU Option Slots
The
SLOT x NET/DBU
modules are described in the section
10/100Base-T Ethernet Interface and Activity LEDs
The Ethernet ports (
flashes when data traffic is being sent or received on the Ethernet port. The green link LED is on when
the router has a good connection to the LAN. The Ethernet port provides the following:
•
10Base-T or 100Base-T with a single connector
•
Auto-negotiation
•
CSMA/CD
•
IEEE 802.3 compatibility
CONSOLE Interface
The
CONSOLE
interface is an EIA-232 serial port (DCE) that provides for local management and
configuration (via a DB-9 female connector).
Connection directly to an external modem requires a cross-over cable.
Power Connection
The rear panel has a power input for connection to the power supply. Power supplies are shipped with
final destinations in mind. For example, domestic routers are shipped with a wallmount supply and
international routers are shipped with a universal input lump-in-line supply with the appropriate
cables. All of the 1U-high products have universal power supplies and are shipped with the appropriate
cable. Please refer to
34
Figure 14. NetVanta 3305 Front Panel Layout
WAN-T1
DSX-1
DBU
SLOT 1 NET/DBU
Figure 15. NetVanta 3305 Rear Panel Layout
option slots support various NIM plug-in option modules. These option
Option Modules on page
ETH 0/1
and
ETH 0/2
) are RJ-45 connectors with LEDs. The amber activity LED
Supplying Power to the Unit on page 83
Copyright © 2010 ADTRAN, Inc.
NetVanta 3000 Series Hardware Installation Guide
Appendix A on page 101
WAN-T1
DSX-1
DBU
ETH 0/1
SLOT 2 NET/DBU
53.
for connection details.
provides
100-250VAC
50/60Hz
ETH 0/2
61200860L1-34AA