Powering The Netvanta 3205 (Ac), Netvanta 3305, Netvanta 3430, Netvanta 3448, Netvanta 3450, And Netvanta 3458; Powering The Netvanta With Octal Poe Upgrade - ADTRAN NetVanta 3458-PoE Hardware Installation Manual

Netvanta 3000 series routers
Hide thumbs Also See for NetVanta 3458-PoE:
Table of Contents

Advertisement

Unit Installation
This unit shall be installed in accordance with Articles 300 and 400 of NEC NFPA 70.
Maximum recommended ambient operating temperature is 50
Powering the NetVanta 3205 (AC), NetVanta 3305, NetVanta 3430, NetVanta 3448,
NetVanta 3450, and NetVanta 3458
The AC-powered NetVanta 3205, NetVanta 3305, NetVanta 3430, NetVanta 3448, NetVanta 3450, and
NetVanta 3458 come equipped with an auto-sensing 100 to 250 VAC, 50/60 Hz power supply for
connecting to the proper power receptacle. A grounded, three-plug detachable cable is included with the
shipment.
This unit shall be installed in accordance with Articles 300 and 400 of NEC NFPA 70.
Power to the AC system must be from a grounded 100 to 250 VAC, 50/60 Hz source.
Maximum recommended ambient operating temperature is 50

Powering the NetVanta with Octal PoE Upgrade

The NetVanta PoE Power Supply is an auto-sensing 100 to 250 VAC, 50/60 Hz power supply for
connecting to the proper power receptacle. This power supply is only available with the Octal PoE
Upgrade bundle for the NetVanta 3448 and the NetVanta 3458, which include the power supply and the
Octal PoE module. A grounded, three-plug detachable cable is included with the shipment.
This unit shall be installed in accordance with Articles 300 and 400 of NEC NFPA 70.
Power to the AC system must be from a grounded 100 to 250 VAC, 50/60 Hz source.
Maximum recommended ambient operating temperature is 50
The NetVanta PoE Power Supply is intended
to supply up to 8 PoE ports at 48 VDC, 15.4 watts per port.
to be installed, maintained, and serviced by qualified service personnel only.
for use only with NetVanta units with the Octal PoE Upgrade module installed.
Before powering your NetVanta with the PoE Power Supply, the Octal PoE Upgrade
module must first be installed. Refer to
page 99
The NetVanta PoE Power Supply should be installed in a restricted access location
as described in UL 60950-1, first edition.
Under full load, the NetVanta PoE Power Supply may be hot to the touch.
84
for more information.
Copyright © 2010 ADTRAN, Inc.
NetVanta 3000 Series Hardware Installation Guide
Installing the Octal PoE Upgrade Module on
o
C.
o
C.
o
C.
61200860L1-34AA

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents