Netvanta 3205; Figure 10. Netvanta 3200 Rear Panel Layout - ADTRAN NetVanta 3458-PoE Hardware Installation Manual

NetVanta 3000 Series Hardware Installation Guide
NetVanta 3200 Rear Panel Interfaces and LEDs
SLOT 1 NET/DBU Option Slot
The
SLOT 1 NET/DBU
in the section Option Modules on page
10/100Base-T Ethernet Interface and Activity LEDs
The Ethernet port ( ETH 0/1
data traffic is being sent or received on the Ethernet port. The green link LED is on when the router has
a good connection to the LAN. The Ethernet port provides the following:
• 10Base-T or 100Base-T with a single connector
• Auto-negotiation
• CSMA/CD
• IEEE 802.3 compatibility
CONSOLE Interface
The interface is an EIA-232 serial port (DCE) that provides for local management and
CONSOLE
configuration (via a DB-9 female connector).
Connection directly to an external modem requires a cross-over cable.
Power Connection
The rear panel has a 12V input for the power supply included in the shipment. Please refer to
Supplying Power to the Unit on page

NetVanta 3205

The NetVanta 3205 (AC or DC powered) is a modular access router designed for cost-effective branch
office connectivity over MPLS, Frame Relay, multilink Frame Relay, PPP, MLPPP, or Ethernet networks.
This section includes a list of features, a list of shipping contents, and a description of the unit's front and
rear panel designs. For hardware installation topics, such as mounting the unit and installing option cards,
refer to the following sections:
• Mounting Options on page 76
• Supplying Power to the Unit on page 83
61200860L1-34AA

Figure 10. NetVanta 3200 Rear Panel Layout

option slot supports various plug-in NIMs. These option modules are described
53.
) is an RJ-45 connector with LEDs. The amber activity LED flashes when
83.
Copyright © 2010 ADTRAN, Inc.
Physical Descriptions
27