Netvanta Adsl Nim, Annex A (P/N 1202869E1); Figure 36. Netvanta Adsl Nim, Annex A - ADTRAN NetVanta 3458-PoE Hardware Installation Manual

NetVanta 3000 Series Hardware Installation Guide

NetVanta ADSL NIM, Annex A (P/N 1202869E1)

The NetVanta ADSL NIM, Annex A, (shown in
Series. The module provides a single ADSL, ADSL2, or ADSL2+ network interface to support rates up to
25 Mbps. See Table A-12 on page 105
backup applications. See
ADSL Interface
• ADSL over POTS, Annex A
• Supported Standards:
– ITU G.992.1 (G.dmt)
– ITU G.992.2 (G.lite)
– ITU G.992.3 ADSL2 (G.dmt.bis)
– ITU G.992.5 ADSL2+
– ANSI T1.413 Issue 2
– Reach Extended ADSL (READSL2)
• Connector: RJ-1C (6-pin jack, inner pair)
ATM
• Multiple Protocol over AAL5
(RFC 2684)
• PPP over ATM (RFC 2364)
• PPP over Ethernet (RFC 2516)
• ATM Forum UNI 3.1/4.0 PVC
• ATM class of service (UBR)
• ATM F5 OAM
• Up to 16 virtual circuits
61200860L1-34AA
for the pinouts. The ADSL NIM supports an optional DIM for dial
Table A-15 on page 107
WAN-ADSL

Figure 36. NetVanta ADSL NIM, Annex A

Features and Specifications
Copyright © 2010 ADTRAN, Inc.
Figure 36) adds ADSL capability to the NetVanta 3000
for the DBU connector pinouts.
DBU
Compliance
• EMC - see Electromagnetic
Compatibility (EMC) Table on page 7.
• ACTA/FCC Part 68
• AS/ACIF S043
• AS/ACIF S002
• IC CS-03
• EN 60950
• IEC 60950
• UL/CUL 60950
• AS/NZS 60950
• RoHS compliant (1200869E1 only)
(Telecommunications exemption)
Environmental
• Operating Temperature: 0°C to 50°C
• Storage Temperature: -20°C to 70°C
• Relative Humidity: Up to 95 percent,
noncondensing
Physical
• Dimensions: 2.75-inch W x 4.25-inch D
Option Modules
67